We only have one RV exterior ladder available in black and that is the Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA. The Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA is a universal RV ladder that can be attached to an RV with either a contoured or straight rear wall. It is 99-1/2" tall (customizable) x 12" wide but can be cut to the length that you need.
Unfortunately RV ladders are not a standardized part, there is really no way for me to know if or what ladder... view full answer...
We do offer a range of RV exterior ladders that are general-purpose replacements that will work on many trailers and RVs, but none of these is a custom-fit item intended as an exact OEM replacement for any particular unit. RV makers may change ladder suppliers and such items are not usually branded.
All exterior ladders we offer are shown on the linked page, the tallest of which are the Stromberg Carlson 99-1/2-inch models # LA-401BA and # LA-401. For an exact replacement your best bet... view full answer...
If your original ladder was 84-1/4 inches long, the Surco Universal Exterior RV Ladder # SP502L would work well for you.
I don't have access to any reference material that would tell me which ladder would have originally been used on your 1999 Four Winds RV.
If you click the provided link, you can see the varying heights of Exterior RV ladders we offer, which range in height from 84-1/2 to 99-1/2 inches in total height.
To determine the correct ladder, measure from the top of the RV... view full answer...
The Stromberg Carlson RV Exterior Ladder w/ Hinges, # LA-401, in aluminum finish, measures 99-1/2" tall and 12" wide. Like all of our exterior RV ladders this is sold packaged with ladder supports/stand-offs included. view full answer...
We have replacement stand-off or insert nuts for RV ladders but none that are made specifically for a motor home as each piece of hardware used on motor homes is not available in a data base.
If by chance you have an aftermarket ladder, the Stromberg Carlson RV Exterior Ladder # LA-401 or # LA-401BA then we do have the Replacement Stand-Off or Insert Nut for Stromberg Carlson RV Ladder # FST-9975. This also works with their Bunk Ladders # LA-460 and # LA-466.
This replacement nut is about... view full answer...
For a replacement ladder to install on the back of your motorhome I recommend the Stromberg Carlson RV Exterior Ladder, part # LA-401.
This ladder has 7 steps and has pivoting mounting brackets at the top so you are sure to get a good fit. This ladder measures 99-1/2 inches tall and 13-inches wide. The legs can be trimmed to the length you want or need and the ladder has a 250-lb weight capacity. view full answer...
We don't carry the OEM RV ladder for your 2021 Keystone Cougar RKS but we do carry the Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - Black # LA-401BA or the Surco Universal Exterior RV Ladder - 84-1/2" Long # SP502L.
I was unable to find a specific length for the KS096 as it's coming up with two different ladders with only the amount of rungs being the difference. The # LA-401BA is 99-1/2" in length and the # SP502L is 84-1/2" in length. view full answer...
Thank you for the drawing. It was helpful to see the dimensions you are looking at. We only have one ladder that is a universal fit application, so it will fit your RV but it will not fit in a custom way. It will absolutely be able to give you a functional and strong ladder, but it won't fit the mounts that are 22 inches back on your roof. Our ladder only has a 17 inch inside to inside dimension at the top as you referenced. We only have this same model in black # LA-401BA.
This... view full answer...
While we do have some replacement parts (i.e. rungs, end caps, stand-offs, etc...) for RV ladders. We do not have a complete replacement side. I also do not know what ladder you currently have, because unfortunately that isn't something I can look up with your RV information.
The only option that we would have, is a complete ladder replacement. Something like the Surco Exterior RV Ladder # SP501L which is a universal design with legs that can be cut to fit the height of your RV. view full answer...
You can replace the ladder on your Tiffin Allegro motorhome yourself as long as you can choose a replacement that fits on the same mounting points. This matters because RV ladders must be affixed to a structural component of the RV's frame; just the outer skin will not provide the necessary strength to support weight.
You can see our exterior ladders like 99-1/2-inch # LA-401 that you referenced and the Surco Universal 84-1/2-inch ladder # SP502L on the linked page.
RV makers do not maintain... view full answer...
We carry a few exterior ladders, like the Stromberg Carlson RV Ladder # LA-401, that are of a universal fit.
I have linked a product page that will show you all the exterior ladders we carry that might be able to fit your Gulf Stream Crescendo RV. The over all length and width of the the ladders will be listed on the page for you to compare with your current ladder.
For an exact fit, you would need to contact your RV dealer. view full answer...
We may have replacement parts available for you depending on the manufacturer and model of your ladder and AC unit. Stand-off nut # FST-9975 measures 1" x 1" and was designed for use with Stromberg Carlson ladder # LA-401. For a 5" ladder support leg, there is # 8535, which will work with any exterior RV ladder that has 1" round tubing, as well replacement ladder rung # 8538-T.
When it comes to the shroud, the part which may work for you is # AT3308046006, which is a replacement white... view full answer...
For the Stromberg Carlson RV Exterior Ladder, # LA-401BA and the similar Surco Universal Exterior RV Ladder w Center Hinges, # SP501L, we have replacement parts available for the hinges, # SPN-422 stand-off brace, # SPN-416 and items like the endcap, # 8539-CP. But the ladder portion is only sold as a complete assembly. view full answer...
We don't currently carry the OEM RV ladder for your 2018 Thor Hurricane Class A Motorhome but we do carry the Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA or the Surco Universal Exterior RV Ladder # SP502L. The # LA-401BA is 99-1/2" in length and the # SP502L is 84-1/2" in length. view full answer...
We offer a range of exterior ladder assemblies for 5th wheel trailers such as your 2005 Cougar 5th Wheel. There is the Stromberg Carlson RV Exterior Ladder # LA-401, # LA-401BA in black, that fits a straight wall and the Surco ladder # SP501L which fits contoured trailer surfaces. These are all complete ladder assemblies. I prefer the Stromberg Carlson RV Exterior Ladder # LA-401 if you determine it fits your RV. You did not specify the measurements but from the image you attached it... view full answer...
The only ladders we currently carry are a universal style, with only a few minor differences in height and paint jobs. You can get the endcaps, support legs, and replacement steps for the Stromberg Carlson Exterior RV Ladder # LA-401, but you can't get just half of the ladder alone.
If you do end up replacing your ladder with this I highly recommend sealing up your mounting holes with butyl tape # AL28FJ and some silicone sealant. view full answer...
You can measure your existing ladder's overall length from its lower mounting bracket to its horizontal top bar as shown in the linked photo. We offer three different lengths of exterior RV ladder; all can be seen on the link provided. Each one is a universal-fit type which means that the location of its mounting hardware on your RV may differ from that of your original ladder. view full answer...
I looked up pictures of the back of your 2004 Alumascape and it has a square back that the Stromberg Ladder part # LA-401 would fit and work well on.
The legs of the ladder can be trimmed for length with a hacksaw or tube cutter. When you are installing mounting brackets and support pegs, make certain that all screws are fastened to the RV's blocking or subframe on roof. If you are uncertain if your RV has backing installed, you should contact your RV manufacture to confirm. It is unsafe... view full answer...
We have the Surco Universal Exterior RV Ladder, # SP501L along with the Surco RV Ladder Extension, # SP504L. The the Surco, # SP501L allows for customization of length and to fit with contours. Please note the attached images. Even if you do not require the feature of adapting to contours, even in a straight fit it allows for length adjustment. view full answer...
Most RV Ladders are fairly universal, so you most likely will be able to use your mounting brackets. We do have a black ladder with hinges that is a universal fit. I recommend the Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - Black # LA-401BA for your Newmar Ventanna Motorhome. I've attached a photo with dimensions to assist. view full answer...
Go To Results